Crackle Paint Technique

Weathering, Distressing & Antiquing Rustic Crafts

Jacki Cammidge is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Other links on this site may lead to other affiliates that I'm involved with, at no extra cost to you.

Crackle finish started being popular for all kinds of primitive country crafts a few years ago, and then the craze (pardon the pun) went away.

Crackle Paint Techniques

I still use this finish on some things, and I like it even better if I can find a piece of furniture or a door that has this look naturally.

These pieces should be treasured, not stripped down for repainting. 

The genuine article is impossible to really copy, so a piece with natural crackling should be kept that way.

You don't have to wait years to get this same appearance of age and patina.

Here’s what I’ve found to emulate that look and reproduce it with some simple ingredients and methods.  Even though you'll never be able to copy it exactly, it still gives a great old looking appearance to wood objects and furniture.

The genuine article - a crackled door, aged and weathered by nature

Supplies for Crackle Paint Techniques for your crafts:

1. Crackle Medium: This is the key ingredient for achieving the crackle paint effect. It is a transparent layer that causes the paint applied on top of it to crackle.

2. Base Paint: The base paint is the first layer of paint that you apply, and it will become the color of the cracks.

3. Top Coat Paint: This is the top layer of paint, which will crack to reveal the base paint. This should be a different color from your base paint to achieve the maximum crackle effect.

4. Brushes: You will need brushes to apply the paint and crackle medium. It's recommended to have at least two sizes: a larger one for the initial base coat and a smaller one for delicate crackling works.

5. Palette or Mixing Tray: Use this to mix your paint and crackle medium.

6. Sealant: Once you've applied your crackle paint, you can seal it with a clear sealant to protect the effect.

7. Sandpaper: If you're working with a piece of furniture or a frame, you might want a slightly distressed look. Sandpaper can help you achieve this effect.

8. Drop Cloth or Newspapers: Protect your surface from spills or drips while you're working.

9. Water: You'll need clean water for cleaning your brushes.

10. Rags or Paper Towels: These are for wiping up any spills, and also for blotting your brushes if necessary.

Remember, the key to crackling is patience. Crackle medium needs to dry completely before the top coat is applied, and the crackle effect won't appear until the top coat begins to dry. So take your time and enjoy the process!

You'll need several colours of Acrylic Craft Paint, found at dollar stores everywhere. Make sure you buy new stock as it does tend to dry out in the bottle as it ages.

In other words, spend the couple of dollars a bottle instead of stock clearance of one dollar which will be wasted.

For the cheapest crackle finish of all find some of that Elmer’s White Glue, a staple in all elementary schools across North America; it’s one the most common types of glue and available in any stationary, box store or dollar store.

I use this as the base, after trying some of those really expensive crackling medium type products, I’ve found Elmer’s White Glue to work just as well, and much more economically too.

Get your pieces of carpentry scraps together – if you’re making a rustic wooden box, attach the pieces first before you paint, as it’s easy to scratch the finish (rustic is the look we’re after, but this may be a bit much!).

You’ll also need some fine grade sandpaper; a tack cloth or two; several paint brushes in different sizes and a drop cloth or newspaper to work on.

Crackle paint finish, with the paint just applied
Once the paint starts to dry, the crackling appears

First paint the board with a base coat of acrylic craft paint.

This can be any colour you like (or even one you don’t, as only tiny amounts of this will show).

Allow to dry thoroughly, overnight if possible. You can omit this step if you want just the wood colour to show through.

Sand the board to remove any dust that may have stuck to the paint, and wipe with a tack cloth.

Dribble the Elmer’s White Glue or crackling medium of choice onto your prepared board, liberally.

Using a slightly damp paint brush spread the glue around until the board is covered.

Now dribble the acrylic paint in your choice of colour over the glue or crackle medium.

With a barely damp clean paintbrush, using strokes down the length of the board with the grain cover the glue completely.

Here's what you'll need for this project - buy them from Amazon.

I generally buy my acrylic craft paints at the dollar store, but if you don't have one locally, order them online here.

If you're not keen on trying the crackling medium, Elmers glue is a great, very economical option. Get that here. There is no need to get any kind of solvent - this is water soluble, and very safe to use.

Crackle medium is the next coat if you're using it, applied with a brush - don't get too precious with this, the application doesn't have to be perfect, that's where the rustic look comes to the fore.

Allow to dry, and watch if you like for the crackling to appear as the paint dries. This method results in a finer crackling.

Variations can be achieved by diluting the Elmer’s White Glue with up to ten parts water, but I’ve had varying success with this, so experimenting is the name of the game.

See more detailed instructions on how to use Elmers Glue for crackling.

Try mixing a small amount of glue with a few drops of water, paint it on, then allow to try for a few minutes, then dribble paint and use a damp brush to spread it. This will give the effect of more or less crackle.

Rust-Oleum Varathane Interior Crystal Clear Water-Based Poleurethane, Satin Finish is my go-to finish. This will last for years, even outdoors.

Use your crackle painted wood for rustic garden signs, twig handled trugs and barnboard hook boards with either twig hooks or rusty nails salvaged from other projects. If you can find old square nails, so much the better.


Learn what it takes to be creative - we all have the gene but how do we develop it? Get the free guide!

Fill in the form below for your copy;

(Don't be disappointed - use an email address that will accept the free download - some .aol email addresses won't. 

If you don't see your download within a few minutes, try again with another email address - sorry for the bother.)

Find out more about the How to be Creative Guide

Free How To Be Creative Guide

Please note that all fields followed by an asterisk must be filled in.
 

Please enter the word that you see below.

  



Follow Blue Fox Farm on Pinterest
Follow Blue Fox Farm on Facebook
Follow Xeria on Twitter